Input Power 16W TUV SAA RED CE Approved For Ceiling Light Dimmable Motion Sensor
Features:
1.5.8G microwave motion sensor with dimming function.
2.Constant current output.
3.ON/OFF control by relay.
4.Tri-level control by 1-10v output.
5.Suitable for ceiling lights or bulkhead.
6.Sensitivity and reliable
7.3 years warranty.
Technical data:
| Model number | HT16V | | Input voltage | 120-240VAC,50Hz/60Hz | | Input current | 0.3A Max | | Input power | 16w | | Output LED current | 0.3A/0.35A | | Output LED voltage | 24V-52V DC | | Output LED power | 7W-16W | | Stand-by power | ≤0.5W(230VAC) | | Empty load voltage | ≤63V | | Power factor | ≥0.9 | | Efficiency | 87%(Max.) | | Microwave frequency | 5.8GHz±75MHz | | Microwave power | <0.3mW | | Detection area | 50%/100% | | Hold time | 5s/90s/5min/10min | | Daylight threshold | 2Lux/10Lux/50Lux/Disable | | Stand-by period | 0s/10s/10min/+∞ | | Stand-by dimming level | 10%/30% | | Mounting height | Max.6m (ceiling mounted) | | Deteation range | Max.ø14m (ceiling mounted) | | Motion detection | 0.5–1.5m/s | | Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with drying agent(120pcs/carton,gross weight 8.24kg) | | Detection angle | 30°-150° | | Operating temperature | –20℃–+50℃ Tc:80℃ | | Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP | | EMC standard | EN55015 | | Safety standard | EN61347-1 EN61347-2-13 EN60598-1 | | IP rating | IP 20 | | Warranty | 3 years | |
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Output Current
level Period
Dtection Area:
The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-6M.
Setting:
By dialing the code you can set the parameters you want to achieve the effect you want.
Detection area: Hold time: Daylight threshold: Stand-by period: Stand-by period:
In this area, The period of Definition of the The period of The definition
movement will light keeping ambient brightness; light keeping of low output
be detected 100% brightness only when the low output in the stand-by
and able to after moving ambient brightness before it's period.
trigger the objects leave is lower than the completely
sensor.100% the detection preset specific switched off,
detection area area. lux amount,the when it's preset
is also known sensor will be work; as"∞",the light
as the strong when it'spreset as always keep at
sensitivity. "disable",the sensor low output if
will work everytime no movement in
it detects motion the detection
regardness the area and doesn't
ambient brightness. turn off.
Installation Method:
1.Output current setting:
Set the current of 350mA with plugging the black cap
and pull out to set with 300mA,More options of current requirements.
2.Installation:
The installation finished product drawing is shown:
Application:
1.Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.Applications:Corridor,Staircase.The daylight threshold is set to"2Lux,10Lux,50Lux".
With sufficient daylight,even With insufficient daylight, After the last detection and the
when motion detected,light when motion detected, present hold time elapsed,
remains OFF. light ON. light OFF.
2.No daylight function:
The daylight threshold is set to"Disable".Light on when detect movement,after people leave,light off after stand-by period,Applications:Dim places such as basement parking ,underpass.
When motion is detected, After people leave the After the last detection and
the sensor will switch on the detection area,light remains the present hold time
light to 100% brightness. 100% brightness within elapsed,light OFF.
hold time.
3.Function demo-dimable control/corridor function
With sufficient daylight,even With insufficient daylight, After the last detection the light
when motion detected,light when motion detected, will be dimmed down to the
remains OFF. light ON. stand-by dimming level
(10% or 30%)after hold time
After the stand-by period,
light OFF.
User Notes:
1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2.The driver voltage shall be stable and float within 10%.
3.Detection area will be affected by speed of motion, mounting height and movement volume.
4.Conduct test on sunny days without the lampshade which will affect the tested lux value.
HT16V (16W).pdf
Product Tags:
|
|
TUV SAA RED CE Ceiling Light 16W Dimmable Motion Sensor Images
|
